Fritz manual 7270

Box of the same type. For more information, see the Saving Settings instructions. Box, these will be deleted when the factory settings are loaded. For this reason, after loading the factory settings you must check the network settings of your computer and adapt them in order to be able to access the FRITZ! Box again. If you use an individual wireless network key, when you load the factory settings this key will be deleted and replaced with the default value of the FRITZ!

Stick can add 5GHz support if your notebook lacks this feature. New notebooks such as Centrino 2 systems may include 5GHz radios.

If they don't, then you can use an adapter like AVM's own dual-band Fritz! Box's USB port and downloads settings, allowing it to install and connect immediately when plugged into a notebook. Box is exciting. There are two wired ports for phones, while the built-in DECT base station can support up to six handsets. The can manage up to four simultaneous calls. One of those will be on the landline, while the others use VoIP subscriptions — you can load up to ten services on the box.

This means that you can give workgroup or family members their own extensions. Those handsets can be anywhere in the building, without needing a wired connection to the base station. You can set rules for dialling out, and link each handset to one or more VoIP subscriptions. Each one can have its own incoming numbers. More voice features That turns out to be just the start.

Box includes up to five answering machines — put one on each of your VoIP services, and it will store the messages as WAV files or email them to you.

It also accepts faxes, again sending them to you as emails. There are enough call-diversion features to play with for hours. The box can reroute incoming calls to a preset number — or filter them, perhaps only sending certain numbers on, and routing others to particular extensions.

It also has call-through, so you can dial in to it, use a PIN, and have your call routed onwards over the internet. The can hold a phone book, allowing you to dial from the screen, plus a very thorough call log. You can also set an alarm call on any of the extensions. Box models, the has a fast USB 2. USB storage can be mapped as a regular network drive on any or all PCs on the network.

The can support multiple USB devices via a hub. Internet access for the appropriate connection is configured on the "Internet Connection" page. Click on the "Apply" button to save your settings. If you leave the page without saving, all of your changes will be discarded. In the "Internet Service Providers" area there are two drop-down lists presenting a selection of Internet service providers.

Select your internet service provider:. What you select in these two lists depends on your circumstances and on what you would like to do. Once you have made your selections in the two lists, then the further settings you need to make will be displayed.

The possible initial situations are listed below. For each possible situation, the settings you must make are described along with anything else you must do. Check the descriptions to see which situation applies to you. In this case the two areas "Account Information" and "Connection Settings" appear so that you can configure additional settings. The fields in the "Account Information" area are already adapted to your internet service provider's naming conventions. Enter the account information you received from your Internet service provider in the appropriate fields.

The connection settings are already set to the values used most often. If you would like to change these values, click "Change Connection Settings". The "Internet Connection" areas appear, where you can make changes. To the Help on connection settings. Enter the transfer rate of your internet connection in the "Connection Settings" area. This information is necessary to prioritize your network devices. Box automatically obtains a new IP address, and as a consequence, a new network address range.

A separate window presents an overview of the new network address information. Make a note of this information or print out the page. Box now can be reached at the new IP address. Box should be an IP client in the existing network rather than functioning as a router, select the "More internet service providers" entry in the first list and "Other internet service provider" in the second list.