Autocad 2013 complete command list

Message 4 of 8. Shaan Hurley, Autodesk, Inc. Thanks, Sharon. Message 5 of 8. I ran into this earlier, but what about commands like overkill and SSX? Realize a lot are express tools but there still are other routines that exist with AutoCAD that aren't in that database. Message 6 of 8. Message 7 of 8. C'mon now, be fair. Clears screen to show only the drawing area and hides palettes and tabs. Press it again to reset default AutoCAD interface.

You can use this palette to modify most of the properties of the object too. You can also use PR command to open the property palette. You can use it to open design center palette which contains many AutoCAD blocks that can be used directly in your drawing.

You can use this keyboard shortcut to toggle the visibility of the command line. If for some reason your command line is hidden from the drawing area, then use this keyboard shortcut to bring it back.

To paste the copied objects of the clipboard in the drawing keeping their original properties, you can use this keyboard shortcut. To paste the copied objects as a block you can use this keyboard shortcut, the block thus created will have a random set of characters as is name. You can use this keyboard shortcut to make blocks quickly without going through the create block window. This keyboard shortcut can be used to undo last action in your drawing. You can press this shortcut key multiple times to undo many actions.

The status bar is an important feature of AutoCAD user interface and its tools are required quite frequently while making or editing your drawing hence they are available on the status bar for easy access. You can activate or deactivate status bar icons using keyboard shortcuts, commands or by clicking on their respective icon.

In this section, I have listed the most frequently used status bar options along with their properties and uses. This status bar tool will toggle the visibility of background grid which is often visible in your drawing area. Toggle Snap mode, when snap mode is active AutoCAD cursor will jump to specific points in the drawing area which is defined in snap mode. By default the value of this system variable is set to -3 which keeps it off you change this system variable to 3 to make dynamic input active.

Dynamic input allows you to add information dynamically on the cursor tooltip. When ortho mode is on you can make lines either horizontally or vertically only. With polar tracking active you can make lines inclined to any angle which is defined in the polar tracking increment angle. Using this toggle you can activate the isometric drawing plane in AutoCAD. You can also toggle between different isoplanes using F5 function key.

Using this option you can track snap points of geometries like center, midpoint, endpoint etc and make geometries with their reference. One the most important status bar toggles. This option allows you to make precise AutoCAD drawings. This system variable toggles the visibility of lineweight in a drawing. The default value of this system variable is OFF which keeps the lineweight display off you can change its value to ON to keep lineweight visible in the drawing area.

Just like lineweight this status variable allows you to toggle the visibility of transparency of an object. You change the value of this system variable to 1 to make transparency visible or 0 if you want to make it invisible. Using this system variable you can select overlapping objects very easily. When the value of this system variable is set to 2, an overlapping icon and a menu containing a list of overlapping objects appear and you can select the required object from this list.

If you set the value of this system variable to 1, only the overlap icon appears not the menu. You can turn this off by changing the value of this system variable to 0. Dynamic UCS can be activated or deactivated using this function key. Using this status bar option you can open Graphics configuration window which is used to change settings related to display and graphics properties of AutoCAD.

These are some of the commands which can be frequently used in your drawing workflow to improve your overall efficiency. You might be familiar with many of these commands but there are also some commands which are really helpful still they remain largely unused.

This command is useful for counting the number of blocks in your drawing. It reports the number of each instance of block used in the drawing along with its name. To count the block it should be visible in the drawing area.

Using this command you can convert single line as well as multiline text into geometries. Using this command you can make infinite lines starting from the point of selection. When you trim or break this infinite line to a finite length it becomes a simple line geometry.

This command makes a single point geometry in the drawing. To modify the type of point created by this command you can use PTYPE command and choose the desired point type from Point Style window. Using this command you can make a revision cloud geometry by freehand sketching. You can make a freehand sketch using this command. You can use Line, Polyline or Spline as the object type for making this freehand sketch.

To cancel repetition of command press ESC key. Use this command to copy nested objects from a block or Xref without exploding them. Using this subcommand you can perform calculations directly on the AutoCAD command line even when you are in the middle of a command.

Explodes the block containing attributes retaining the attribute setting and its layer definition. This is especially helpful if you want to retain the text of attribute after exploding the block.

Using this command you can check the spelling of selected text and correct the spellings from Check Spelling window. This command can be used to write arc aligned text in AutoCAD. You can use this command to even write text aligned to a circle. More about this command can be found in this related article.

This command can be used to restore the last deleted object in your drawing. After deleting an object if you made many other changes in the drawing and realized that you might need to restore the deleted object then simply type OOPS and press enter. This command can be used to change the space of an object from model space to paper space and vice versa.

See the animated image shown below for reference. This behavior is now turned on by default. Additional options such as spacing, ordering, and text wrap are provided. Right-click to display viewing options. Improved performance and reliability for 3D rendered visual styles, especially for models with a large number of small blocks containing edges and facets. X DIM Creates multiple types of dimensions within a single command session. The Center Mark option has been removed from the command.

PDF has been added as a valid file type to import. Command prompt has been modified and a new Mode option has been added to control whether the command repeats automatically. Times are now displayed to the nearest second. Added support for US Survey feet when inserting a drawing as a block or attaching it as an xref. Stored date and time no longer includes milliseconds. Indicates whether the Design Feed palette is open or closed.

Default value has been changed to 0. A currently nonexistent layer can be specified as the default layer for new hatches and fills. Added support for US Survey feet. The Realistic visual style maintains the new Exposure setting of the active viewport when orbiting the model. The Realistic visual style maintains the new Exposure setting of the active viewport when creating an animation.

Support for image-based lighting IBL was added. In earlier releases, DIM was used to access the Dimensioning mode commands. Sets options for working online with Autodesk A, and provides access to the design documents that you have stored in your cloud account. Automatic saving to your A Drive has been removed. Instead, save or copy the drawing files that you want to upload to your A account directly to your local A Drive folder.

Render presets created in earlier releases are no longer supported; only render presets created in AutoCAD are supported. The render engine was replaced with a new physical based renderer. Controls image-based lighting and photographic exposure for a rendered image. Design of the dialog box was revised, and the information shown is related to the new renderer.

New options for modifying an existing revision cloud and creating rectangular and polygonal revision cloud have been added. Rectangular is the new default revision cloud creation method.

A new type of section object, slice, has been added for point cloud objects. Revises and adds security controls. Support included for point clouds. When hovering over a point cloud, the origin of the UCS is moved to the nearest point of the point cloud object.

The minimum value has been changed from 1 to No longer supports isolation of selected objects when panning. Removes the capability for creating EXE files due to security concerns. Files can only be packaged into ZIP files. The ability to add a password has also been removed. X X CLIP Crops selected objects such as blocks, external references, images, viewports, and underlays to a specified boundary.

No longer supports clipping of point clouds. Files can only be packaged into. ZIP files. Prompts and the dynamic display behavior when specifying the location of the geographic marker and the north direction have changed. Now displays the Graphics Performance dialog box. Enhanced to apply to map images.

Adds subscripting and superscripting features, and Caps Lock detection. Enhances options for creating numbered and bulleted lists and automatic text stacking. In the System tab, Balloon Notifications, removes the option to display live update notifications. Live updates are now managed by the Autodesk Application Manager. Also, combines partially overlapping or contiguous ones. Can now be used in the Block Editor.

Adds support for removing orphaned data such as DGN linestyles. No change in this release, but the ability to add a password to a drawing will be removed in the next release of AutoCAD because it does not meet contemporary security standards. You will continue to be able to open password-protected files. Now displays a New Tab. Adds the ability to create arcs in a clockwise direction by holding down the Ctrl key as you drag. Now chamfers the first and last segments of an open polyline to create a closed object.

Now retains spaces in the names of converted plot styles. By default, the baseline dimension now inherits the style of the dimension that is being continued. By default, the continued dimension now inherits the style of the dimension that is being continued. Adds the ability to convert xrefs between overlays and attachments.

Now fillets the first and last segments of an open polyline to create a closed object. Draw Toolbars , Modify toolbars. With this suite of tools, you will be able to produce high quality designs in less time, via the significant improvements in precision and flexibility while working in both 2D sketches and 3D modeling. Autodesk stopped supporting Apple's Macintosh computers in Over the next several years, no compatible versions for the Mac were released. Mechanical drafters prepare plans for machinery and mechanical devices.

Architectural drafters draw up plans for residential and commercial buildings.